Four Patch Pin Cushion

Four Patch Pin Cushion

Pin cushions are not only practical but also a great way to show off your creativity. Plus, they make adorable gifts for fellow stitchers! So, let's dive in and learn how to make your very own four patch pin cushion.

 

 

Materials Needed:

 

  • Fabric Scraps big enough to make 2.5 " Squares
  • 2 Buttons
  • Sewing Machine
  • PolyFil
  • Scissors
  • Iron
  • Pins
  • Needle & Thread

 

 

Step 1) Cut out 8, 2.5" squares. Let your imagination run wild, this is just a pin cushion so have fun with your fabric pics.

 

 

 

 

 

 

Step 2) Sew 2 Four Patch blocks. I use a 1/4" seam allowance for entire project.

 

 

 

 

I press my seams open.

 

Pin through both seams to align.

 

Perfect seam alignment!

 

 

 

Step 3) Cut out 3/4" square "notches" at each corner of both Four Patch blocks.

 

 

 

 

 

 

 

 

Step 4) Pin and sew each "notch" to give pin cushion its square dimension. Back stitch at beginning and end.

 

 

 

 

 

 

 

 

 

Step 5) With right sides together fit one half of pin cushion into the other. Take time to match the seams and pin. Sew around being sure to leave a 1.5" opening to turn, also, make sure to back stitch at beginning and end.

 

 

 

 

 

 

 

Step 6) Turn right side out and carefully fill with stuffing. I use a chop stick to push stuffing into all the corners.

 

 

 

 

 

 

Step 7) Using the Ladder Stitch close the opening.

 

 

 

 

 

 

Step 8) Using a long doll needle threaded with embroidery floss run needle through top button into the center of the pin cushion and out the bottom of the pin cushion.

 

 

 

I used a long doll needle, antique Mother of Pearl buttons and cotton floss.

 

 

Needle going down through pin cushion and through button on bottom.

 

Thread bottom button onto needle and then go through the bottom (right next to where the needle came out) of the pin cushion through the top (right next to where the needle and floss went in) and then through the button.

 

 

 

Needle coming back up from the bottom and through button on top.

 

Trim the floss leaving a good length to know. Pull the floss tight to create indent/dimple in pin cushion and tie a square knot. Do a final trim of the floss and you're done!

 

 

 

Take those 2 strands of floss and tie, pulling tight to make the dimple and then knot.

 

Here's the top of the pin cushion.

 

Here's the bottom of the pin cushion.

 

Tips and Tricks

 

  • Experiment with different fabric combinations to create unique designs.
  • Consider adding decorative elements like unusual buttons, ribbons, or embroidery to personalize your pin cushion.
  • If you're feeling adventurous, try using contrasting thread colors for added visual interest.

 

Remember, practice makes perfect, so don't worry if your first attempt isn't flawless. The most important thing is to have fun and enjoy the process of creating something beautiful with your own hands.

 

Happy stitching!

 

Jayne

 

 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.